Ceracoat™ Heavy Duty Textile Care
Textile Care can be used for most absorbent surfaces including paper, clothes, carpets, curtains, mattresses, car seats, shoes and even sued leather. It features unique
nanotechnology that works to create a shield which protects it against whatever it comes into contact with - for example, everyday liquids including, coffee, wine, and water. As such liquids can't penetrate the surface, dust and dirt likewise struggle to settle or adhere, allowing them to be easily brushed or wiped off using a damp cloth or paper towel. This nanotechnology protective coat is invisible and breathable, so it’s as if it’s not there at all!
Please Note: Heavy Duty Textile Care is recommended for harder working textiles or harsher environments for longer lasting protection and where larger volumes of liquid spillages are expected. It is ideal for shoes, car seats, sofas, seats and mattresses.
200ml Spray Bottle PLease contact
Is this product UV-stable and is it durable?
Yes it is UV stable and it is very abrasive resistant.
Can I wash the clothes with Ceracoat™ Textile care or will I have to re-apply it?
Yes there is no issue in washing the clothes with the Ceracoat™ textile care applied. The coat won’t wash away. However, the clothes should be washed in temperatures below 50 degrees, and without strong washing powders, and ideally should not need soaps as there should be no dirt or liquid penetration.
How long does it last?
This is dependent on the use, application and the surface that it is applied to. If it is used in harsh environments consistently in this case it may need to be applied more often. However to give you an idea it usually around 45 wash cycles under the conditions mentioned above.
The material MUST be cleaned with water only after normal wash cycle as detergent residue can cause a rejection of the nano-coat. This can be done by running an additional rinse cycle in the washing machine, or a complete wash cycle with no soaps or detergents.
Surface must be clean and completely dry.
Start by testing the textile: Put a drop of water on the surface. The drop has to be absorbed by the surface to be treated with Ceracoat™ Textile. If the water drop is not absorbed this means that the surface cannot be treated with Ceracoat™ Textile care but rather an alternate product such as Leather care.
Otherwise, just spray Ceracoat™ Textile Surface Care on the surface from around 10-15cm away until you see a thin humid film on the surface or a slight temporary decolourisation.
Let it dry for 24 hours or dry it with a hair dryer.